Lexmark C78x User Manual

Diagnostic information 2-71
5061
Ready bin x full message—may be able to clear message and will feed paper into bin
selected.
Note: This sensor is normally in a open position with the flag out of the sensor slot.
Bin x full—no message that bin x is full message
5
Voltage check, base printer autoconnect connector—
Turn the power off, and remove the output option from
the printer. Check the voltages on the base printer top
autoconnect connector. See “Autoconnect—bottom”
on page 5-19.
Are the voltages correct?
Replace the
output option.
Replace the
bottom option
autoconnect
cable.
Step Actions and questions Yes No
1 Bin x sensor (bin x=Sensor 1 through 5)—Make sure
the sensor is seated correctly in the side of tray x.
Is the sensor seated correctly?
Go to step 2 Install the sensor
correctly.
2
Bin x sensor cable—Make sure that bin x sensor cable
is connected to the sensor and to the control board.
Is the sensor cable connected correctly?
Go to step 3 Install the sensor
cable correctly.
3
Bin x sensor flag—Check the bin x sensor flag for
binding and proper operation.
Are there any problems with the sensor flag?
Repair or replace
the sensor flag.
Go to step 4
4
Bin x sensor cable—Check the continuity of the sensor
cable.
Is there continuity?
Replace the bin x
sensor.
Replace the bin x
cable.
Step Actions and questions Yes No
1 Bin x sensor (bin x=sensor 1 through 5)—Make sure
the sensor is seated correctly in the side of tray x.
Is the sensor seated correctly?
Go to step 2 Install the sensor
correctly.
2
Bin x sensor cable—Make sure that bin x sensor cable
is connected to the sensor and to the control board.
Is the sensor cable connected correctly?
Go to step 3 Install the sensor
cable correctly.
3
Bin x sensor flag—check the bin x sensor flag for
binding and proper operation.
Are there any problems with the sensor flag?
Repair or replace
the sensor flag.
Go to step 4
4
Bin x sensor cable—Check the continuity of the sensor
cable.
Is there continuity?
Replace the bin x
sensor.
Replace the bin x
cable.
Step Actions and questions Yes No

Lexmark C78x Specifications

General

Brand	Lexmark
Model	C78x
Category	Printer
Language	English