Packet Group Considerations
....................................................................................................................................................................................................................................
Overview
This section discusses packet group engineering considerations.
Equipage
One (or more) SIP packet group(s) must be provisioned from the
5E-XC
™
to each switch in the network to which it must communicate
directly for SIP packet trunking. Each SIP packet group must be
supported uniquely either by one association set when the SCTP
transport layer is used, or by one UDP path when the UDP transport
layer is used. The transport layer used (SCTP verses UDP) places
different limitations on the number of SIP packet groups that can be
provisioned.
Engineering Considerations
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
4-13
To Next Page
Loading...
Need help?
General
