Lucent Technologies 5ESS - Remove All SIP Trunk Groups from Route Lists (RC;V 10.4)

To Next Page

To Previous Page

Remove All SIP Trunk Groups From Route Lists (RC/V 10.4)

....................................................................................................................................................................................................................................

Purpose

The BRCS MC Route Index Expansion view (RC/V 10.4) is used to

delete MC Route Indices. The MC Route Index may be defined for

accessing a trunk group which is used as a private facility, an SFG or

as overflow to POTS routing.

When to use

Use this procedure to delete all MC route indices that point to trunk

groups used by SIP-T packet groups.

Related information

Refer to 235-118-258, Recent Change Reference for information on

the RC/V system.

Refer to 235-080-100, Translations Guide, for information on Office

Records (output reports).

Refer to the 235-600-700/750, Input/Output Messages manuals for

additional information on the Input and Output commands.

Admonishments

None.

Before you begin

Required Tools

• Supplemental Trunk Line Workstation (STLWS) or Recent

Change and Verify (RC/V) terminal

• Access to RC/V Menu Interface

Required Material

• The 5ESS

switch must be running a 5E16.2 FR3 software

release or later with the SIP for Packet Trunking - NAR feature

software.

Required Information

• All MC Route Index numbers assigned to SIP-T packet trunk

groups.

Required Conditions

• None.

Procedure

............................................................................................................................................................

Identify the TRUNK GROUP numbers for trunk groups that have