tasks. Responsible personnel should have a working knowledge of
telephony, switching, routing, and networking technologies.
How to use this
information product
Each chapter in this information product groups related information
about the SIP application.
Chapter Content
1. Overview Overview of SIP from an industry perspective
and Lucent Technologies’ perspective.
2. Architecture Overview of the SIP architecture, starting at
the Network view, then narrowing down to the
System view, and finally, focusing on the
hardware view.
3. Call Flow Overview of SIP call flows through the
network (office-to-office), and through the
5ESS
®
switch hardware.
4. Engineering
Considerations
Things to keep in mind when engineering SIP
into your switch and network (for example,
capacity, configuration, constraints, IP
addressing schemes, network management,
performance monitoring, and OS impact).
5. Provisioning Procedures required for provisioning all
aspects of the SIP platform on your switch and
in your network.
6. Deprovisioning Procedures required to remove the SIP
application from the 5ESS
®
switch.
7. Maintenance
Considerations
Overview of troubleshooting and maintenance
specific to SIP.
8. Glossary List of acronyms used within this IP and their
expansions.
9. Index Index of subjects covered within this IP.
Conventions used
No special or unusual conventions are used in this information
product.
Systems supported
This information product supports software releases 5E16.2, Feature
Release 3, and later.
5E16.2 and Later Software Releases
About this information product
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
,
Lucent Technologies
xix
To Next Page
Loading...
Need help?
General
