Insert SCTP Association (RC/V 33.22)
....................................................................................................................................................................................................................................
Purpose
SCTP Association (RC/V 33.22) defines an association between near
and far SCTP endpoints.
When to use
Use this procedure to create an association between a near and far
SCTP endpoints.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
• Association Number - Identifies the SCTP association. This
number must be unique for all SCTP associations provisioned in
the office
• GSM - Identifies the Global SM that owns the processor group
that supports the SCTP endpoint corresponding to this SCTP
association
• Near endpoint
• Far endpoint.
Required Conditions
• Protocol Handler is defined (RC/V 22.4)
• Channel Group is defined (RC/V 22.16)
• Secured Feature 684 is enabled (RC/V 8.22)
• SIP GSM defined (RC/V 5.80)
• Processor Group is defined (RC/V 33.16)
• Internet Protocol (IP) Processor is assigned (RC/V 33.1)
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-65
To Next Page
Loading...
