• Ethernet IP interface is defined (RC/V 33.4)
• Internet Protocol routing is defined (RC/V 33.3)
• SCTP Parameters is defined (RC/V 33.18)
• SCTP near endpoint is defined (RC/V 33.19)
• SCTP Association Parameter Set is defined (RC/V 33.20)
• SCTP far endpoint is defined (RC/V 33.21)
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
33.22
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
............................................................................................................................................................
3
Type and enter the insert command.
I
Result:
SCTP ASSOCIATION page is displayed and the cursor is
located at ASSOC NUMBER field
............................................................................................................................................................
4
Using the RC/V 33.22 form as a guide, type and enter the indicated
values for each field.
• *ASSOC NUMBER
• #GSM
• #NEAR ENDPOINT NAME
• #FAR ENDPOINT NAME
• SCTP ASSOC PARM SET NAME
............................................................................................................................................................
5
Enter the insert command.
I
Insert SCTP Association (RC/V 33.22)
Provisioning
....................................................................................................................................................................................................................................
5-66
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
To Next Page
Loading...
Need help?
General
