Lucent Technologies 5ESS - Delete Protocol Handler (RC;V 22.4)

To Next Page

To Previous Page

Delete Protocol Handler (RC/V 22.4)

....................................................................................................................................................................................................................................

Purpose

The Equipment Subunit Protocol Handler view (22.4) defines the

hardware for the protocol handlers equipped on the shelf.

When to use

Use this procedure to degrow a PH in the switch.

Related information

Refer to 235-118-258, Recent Change Reference for information on

the RC/V system.

Refer to 235-105-331, Hardware Change Procedures - Degrowth for

information on PH degrowth.

Admonishments

None.

Before you begin

Required Tools

• Supplemental Trunk Line Workstation (STLWS) or Recent

Change and Verify (RC/V) terminal

• Access to RC/V Menu Interface

Required Material

• The 5ESS

switch must be running a 5E16.2 FR3 software

release or later with the SIP for Packet Trunking - NAR feature

software.

• The PHs must be installed in the shelf of the PSU2.

Required Information

• Switching Module (SM) Number

• Packet Switching Interface Unit Number

• Packet Switching Unit Shelf Number

• Position

Required Conditions

• The CRIT PSU (critical PSU2) must be set to N on RC/V 22.2.

Procedure

............................................................................................................................................................

Refer to the growth procedures documentation.

Reference:

235-105-331, Hardware Change Procedures - Degrowth

Deprovisioning

235-200-118

Issue 3.02B, March 2007

Lucent Technologies

6-87

E ND OF S TEPS

Main Page

Lucent Technologies 5ESS - Delete Protocol Handler (RC;V 22.4)

Table of Contents

Related product manuals