Insert SIP Global SM (RC/V 5.80)
....................................................................................................................................................................................................................................
Purpose
The SIP Global SM view (RC/V 5.80) is used to insert, review,
update, and delete the SIP Global Switching module.
When to use
This procedure is executed to identify an SM to be used as a SIP
Global SM.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
• GSM number
Required Conditions
• Secured Feature 684 is enabled (RC/V 8.22)
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
5.80
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
Provisioning
....................................................................................................................................................................................................................................
5-16
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
To Next Page
Loading...
Need help?
General
