Delete All SIP Packet Groups (RC/V 5.71)
....................................................................................................................................................................................................................................
Purpose
The Packet Group view (RC/V 5.71) is used to delete a SIP packet
group. A SIP packet group is used to designate packet trunking to a
given office.
When to use
Use this procedure to delete all SIP packet groups.
Related information
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• All SIP-T Packet Group numbers
Required Conditions
• All trunk groups that refer to SIP-T packet groups have been
deleted on RC/V 5.1.
Procedure
............................................................................................................................................................
1
Identify the PKT GRP numbers for trunk groups that have SIPT GRP
set to Y. At the MCC or TLWS type and enter the command:
OP:OFR:FORM=5219;
Deprovisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
6-23
To Next Page
Loading...
