Assign Route Index (RC/V 10.2)
....................................................................................................................................................................................................................................
Purpose
The Route Index view (RC/V 10.2) is used to create route indices. A
route index determines a network path, typically used to complete a
call or route to error treatment when the call is unable to complete.
When to use
Use this procedure to assign a Trunk Group to a route.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
• Route Index - number used for all call terminating to a telephone
number.
• Trunk Group Number - TGN defined in (RC/V 5.1)
Required Conditions
• None.
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
10.2
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-91
To Next Page
Loading...
Need help?
General
