Delete Association Set to Another Office
....................................................................................................................................................................................................................................
Purpose
This section defines the procedure for deleting an association set to
another office.
When to use
Use this procedure to delete an association set to another office.
Related information
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• Association Set name
Required Conditions
• None
Procedure
............................................................................................................................................................
1
Examine the PKTGRP/5219 office records to verify that the
association set to be deleted is not assigned to any packet group. If it
is, execute the “Delete Packet Trunking to Another Office” (6-94)
procedure.
Deprovisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
6-97
To Next Page
Loading...
Need help?
General
