Delete All IP Routing for SIP UDP Paths (RC/V 33.3)
....................................................................................................................................................................................................................................
Purpose
The Internet Protocol (IP) Routing view (RC/V 33.3) provides the
capability to deprovision an IP gateway between an external IP
destination and a local IP interface.
When to use
Use this procedure to delete IP gateways between external IP
destinations and local IP interfaces.
Related information
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• Destination IP address.
• Gateway IP address
Required Conditions
• All SIP UDP paths have been deleted on RC/V 33.24
Procedure
............................................................................................................................................................
1
Dump the PCRGRP forms for the processor groups recorded in the
“Delete All SIP UDP Paths” procedure. At the MCC or TLWS type
and enter the command:
Deprovisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
6-55
To Next Page
Loading...
Need help?
General
