Delete All SIP GQPH Pipes (RC/V 17.24)
....................................................................................................................................................................................................................................
Purpose
The QPH Pipe Assignment (RC/V 17.24) defines the GQPH pipe
connecting the QPH or GQPH to the QLPS network.
When to use
Use this procedure to deprovision all GQPH pipes for SIPT service.
NOTE: This is not needed for a DRM/VCDX environment.
Related information
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
Admonishments
The GQPH’s will revert to STBY mode on MCC page 118X,Y,X.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• GSM number
• PSU Shelf
• Channel Group
• QLPS Network
Required Conditions
• All connectivity for SIP-T service to NGSMs has been deleted on
RC/V 17.27
Deprovisioning
....................................................................................................................................................................................................................................
6-72
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
To Next Page
Loading...
