Lucent Technologies 5ESS - Assign MH Pipe (RC;V 17.20)

Assign MH Pipe (RC/V 17.20)
....................................................................................................................................................................................................................................
Purpose
The MH Pipe view (RC/V 17.20) is used to define a Message Handler
(MH) pipe assignment for Quad-Link Packet Switch (QLPS). The MH
pipe is the path from a QLPS to a MH.
When to use
Use this procedure to define a MH pipe when a SM-2000 exists.
NOTE: This step is not needed for DRM/VCDX..
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system and to 235-105-231, Hardware Change Procedures -
Growth.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• None
Required Information
• Switching Module (SM)
Required Conditions
• None.
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
17.20
Result:
Enter Database Operation I=Insert,
Provisioning
....................................................................................................................................................................................................................................
5-26
Lucent Technologies 235-200-118
Issue 3.02B, March 2007