Insert SCTP Association-related Protocol Parameters (RC/V
33.20)
....................................................................................................................................................................................................................................
Purpose
The SCTP Association Parameter Set (RC/V 33.20) view defines
protocol parameters for an SCTP association.
When to use
This procedure defines protocol limits for an SCTP association. The
DEFAULT association parameter set is created either when the first
SCTP association is inserted or when the first non-DEFAULT
association parameter set is inserted. This procedure should be
followed to create a new parameter set, or to modify individual
parameter values (within the allowable ranges for each parameter) that
are different (non-default) from the default value.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
The parameters in this form have default values. Changing any
parameter could cause an interruption in service. Care should be taken
when changing the predefined values.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
• None.
Required Conditions
• Secured Feature 684 is enabled (RC/V 8.22)
• SIP GSM is defined (RC/V 5.80)
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Provisioning
....................................................................................................................................................................................................................................
5-62
Lucent Technologies 235-200-118
Issue 3.02B, March 2007