Insert Router Pinging (RC/V 33.17)
....................................................................................................................................................................................................................................
Purpose
The Internet Protocol (IP) Ping Parameters view (RC/V 33.17) defines
pinging parameters pertaining to a router through a particular
interface.
When to use
Use this procedure to define the pinging parameters of an access
router.
Repeat individual steps of this procedure as required.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
RC/V view 33.17 is Case Sensitive. Integrity of capital and lower case
letters must be maintained.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
• IP Address of the adjacent router (use RC/V 33.3 - GATEWAY
IP ADDR)
• Pinging interval
• Maximum number of failed pings
Required Conditions
• Protocol Handler is defined (RC/V 22.4)
• Channel Group is defined (RC/V 22.16)
• Secured Feature 684 is enabled (RC/V 8.22)
• SIP GSM is defined (RC/V 5.80)
• Processor Group is defined (RC/V 33.16)
• IP Processor interface is defined (RC/V 33.1)
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-47
To Next Page
Loading...
