Lucent Technologies 5ESS - Delete All SIP Global Sms (RC;V 5.80)

Delete All SIP Global SMs (RC/V 5.80)
....................................................................................................................................................................................................................................
Purpose
The SIP Global SM view (RC/V 5.80) is used to insert, review,
update, and delete the SIP Global Switching module.
When to use
Use this procedure to delete the SIP Global SM.
Related information
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• GSM number
Required Conditions
• All SIP-T parameter sets except the DEFAULT set have been
deleted on RC/V 5.82
• All SCTP far endpoints have been deleted on RC/V 33.21
• All SIP-T processor groups have been deleted on RC/V 33.16
• All SIP-T endpoint parameters have been deleted on RC/V 33.18
• All SCTP association parameter sets have been deleted on RC/V
33.20
• All GQPH pipes with SIP-T service have been deleted on RC/V
17.24
Deprovisioning
....................................................................................................................................................................................................................................
6-84
Lucent Technologies 235-200-118
Issue 3.02B, March 2007