............................................................................................................................................................
2
Record the GSM & PROCESSOR GROUP for each UDP PATH, to
be referred to in the “Delete all IP routing for SIP UDP Paths”
procedure which follows.
............................................................................................................................................................
3
Use RC/V 33.24 to delete each SIP UDP path identified in the office
records from FORM 5891 recorded above.
............................................................................................................................................................
4
Backup the office records. At the MCC or TLWS type and enter the
command:
BKUP:ODD;
............................................................................................................................................................
5
Stop. You have completed this procedure.
Delete All SIP UDP Paths (RC/V 33.24)
Deprovisioning
....................................................................................................................................................................................................................................
6-54
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
E ND OF S TEPS
.........................................................................................................................................................................................................................................................
To Next Page
Loading...
