EasyManua.ls Logo

Lucent Technologies 5ESS - Update GSM - Non-GSM Communication (RC;V 17.27)

Lucent Technologies 5ESS
552 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Update GSM - Non-GSM Communication (RC/V 17.27)
....................................................................................................................................................................................................................................
Purpose
The General GSM/NGSM Connectivity view (RC/V 17.27) defines
the logical links between the GSM and Non-GSM.
When to use
Use this procedure to define connectivity between a GSM and
non-GSM for intraswitch networking.
Only SM-2000s are allowed to connect to a GQPH.
Repeat individual steps of this procedure as required.
NOTE: This step is not needed for DRM/VCDX..
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system and to 235-105-231, Hardware Change Procedures -
Growth.
Admonishments
None.
Before you begin
Required Tools
Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
Access to RC/V Menu Interface
Required Material
The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
Service Type.
GSM number
Non-GSM(s) number
Required Conditions
Growth procedures are complete
Secured Feature 684 is enabled (RC/V 8.22)
SIP GSM is provisioned (RC/V 5.80)
Protocol Handler is defined (RC/V 22.4)
Channel groups are provisioned (RC/V 22.16)
Provisioning
....................................................................................................................................................................................................................................
5-28
Lucent Technologies 235-200-118
Issue 3.02B, March 2007

Table of Contents

Related product manuals