Assign Trunk Group (RC/V 5.1)
....................................................................................................................................................................................................................................
Purpose
The Trunk Group view (RC/V 5.1) is used to assign trunk groups.
When to use
Use this procedure to define a trunk group to be used for packet
trunking.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
• None.
Required Conditions
• PKT GRP is defined (RC/V 5.71)
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
5.1
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-85
To Next Page
Loading...
Need help?
General
