Delete All SIP Packet Trunk Groups (RC/V 5.1)
....................................................................................................................................................................................................................................
Purpose
The Trunk Group view (RC/V 5.1) is used to delete trunk groups.
When to use
Use this procedure to delete all trunk groups used for SIP-T packet
trunking.
Related information
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• All Trunk Group numbers used for SIP-T packet trunking.
Required Conditions
• All Route indices that refer to SIP-T packet trunk groups on 10.2
and 10.4 have been deleted.
Procedure
............................................................................................................................................................
1
Identify the TRUNK GROUP numbers for trunk groups that have
SIPT GRP set to Y. At the MCC or TLWS type and enter the
command:
OP:OFR:FORM=5894;
Deprovisioning
....................................................................................................................................................................................................................................
6-20
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
To Next Page
Loading...
