Delete All SIP Call Processing SMs (RC/V 5.81)
....................................................................................................................................................................................................................................
Purpose
The SIP-T Call Processing SMs view (RC/V 5.81) defines SM-2000s
that can serve as a call processing SM for SIP calls.
When to use
Use this procedure to delete all SM-2000 SIP-T call processing SMs.
Related information
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
Refer to 235-105-331, Hardware Change Procedures - Degrowth for
information on degrowth of the PHE2.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• All SIP-T GSM numbers
Required Conditions
• SM-2000 module numbers disabled in the Disable INVITE
Requests (RC/V 5.81)
• All SIP-T packet groups deleted on 5.71
Procedure
............................................................................................................................................................
1
Identify all SIP GSMs that have SIP CP SMs associated with them. At
the MCC or TLWS type and enter the command:
Deprovisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
6-29
To Next Page
Loading...
