Insert Ethernet - IP Interface (RC/V 33.4)
....................................................................................................................................................................................................................................
Purpose
The Ethernet Internet Protocol (IP) Interface view (RC/V 33.4)
provides the capability to provision an IP address, subnet mask, and
associated IP parameters to an internet interface.
When to use
Use this procedure to define an Ethernet IP interface.
Repeat individual steps of this procedure as required.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
RC/V view 33.4 is Case Sensitive. Integrity of capital and lower case
letters must be maintained.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
• Switching Module Number
• PSU Number
• Shelf number
• Channel group number
• Gateway IP address(es)
• IP Subnet mask(s)
Required Conditions
• Protocol Handler is defined (RC/V 22.4)
• Channel Group is defined (RC/V 22.16)
• Internet Protocol (IP) Processor is assigned (RC/V 33.1)
• Processor Group is defined (RC/V 33.16)
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-41
To Next Page
Loading...
Need help?
General
