Dump IP Routing Table
....................................................................................................................................................................................................................................
Purpose
This procedure requests a dump of IP routing tables.
When to use
Use to troubleshoot layer 3 network connectivity problems between
the 5ESS
®
switch and the external network. In particular, verify
connectivity between a SIP PH and an adjacent router.
Related information
Refer to the Input Messages Manual, 235-600-700, and the Output
Messages Manual, 235-600-750, for additional information.
Admonishments
None
Before you begin
Required Tools
• Use of Master Control Center (MCC) or Supplementary Trunk
Line Workstation (STLWS).
Required Material
• The switch must be running a 5E16.2 FR3 software release or
later with the SIP for Packet Trunking feature software.
Required Information
• Refer to Office Record 5880 for provisioned GSMs.
• Refer to Office Record 5989 for provisioned IP routing data.
Required Conditions
• None required.
Procedure
............................................................................................................................................................
1
Request a dump of IP routing tables for a specific SIP PH channel
group number:
OP:TCPIP:RTDMP,CHNG=a-b-c-d;
Where:
a = Global switch module number
b = Packet switch unit 2 number
c = PSU2 shelf number
d = Channel group number
Maintenance Considerations
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
7-87
To Next Page
Loading...
Need help?
General
