Insert IP Routing (RC/V 33.3)
....................................................................................................................................................................................................................................
Purpose
The Internet Protocol (IP) Routing view (RC/V 33.3) provides the
capability to provision an IP gateway between an external IP
destination and a local IP interface.
When to use
Use this procedure to define the IP gateway between an external IP
destination and a local IP interface.
Repeat individual steps of this procedure as required.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
RC/V view 33.3 is Case Sensitive. Integrity of capital and lower case
letters must be maintained.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release with the SIP for Packet Trunking - NAR feature software.
Required Information
• Destination IP address.
• Gateway IP address
Required Conditions
• Protocol Handler is defined (RC/V 22.4)
• Channel Group is defined (RC/V 22.16)
• Internet Protocol (IP) Processor is assigned (RC/V 33.1)
• Processor Group is defined (RC/V 33.16)
• Ethernet IP interface is defined (RC/V 33.4)
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Provisioning
....................................................................................................................................................................................................................................
5-44
Lucent Technologies 235-200-118
Issue 3.02B, March 2007