User Datagram Protocol (UDP) Path Considerations
....................................................................................................................................................................................................................................
Overview
This section discusses the engineering considerations for user
datagram protocol (UDP) paths.
Equipage
The number of UDP paths is determined by the number of SIP packet
groups that use UDP as the transport layer to the far office. There is a
one-to-one correspondence between UDP-supported SIP packet groups
and UDP paths. There is an office-wide maximum limit of 128 UDP
paths. The maximum number of UDP paths could all be provisioned
on a single SIP processor group if there were the maximum number of
different far-end IP addresses with which to communicate.
Engineering Considerations
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
4-17
To Next Page
Loading...
Need help?
General
