Lucent Technologies 5ESS - Disable INVITE Requests (RC;V 5.81)

To Next Page

To Previous Page

Disable INVITE Requests (RC/V 5.81)

....................................................................................................................................................................................................................................

Purpose

Disabling ″INVITE″ requests should prevent any SIP calls from being

originated or terminated. Outgoing calls will not be routed on SIP

packet groups. The SIP-T Call Processing SMs view (RC/V 5.81)

defines SM-2000s that can serve as a call processing SM for SIP

calls.

When to use

Use this procedure to disable an SM-2000 from processing SIP calls.

Execute this step for each SIP GSM.

Related information

Refer to 235-118-258, Recent Change Reference for information on

the RC/V system.

Refer to the 235-600-700/750, Input/Output Messages manuals for

additional information on the Input and Output commands.

Admonishments

None.

Before you begin

Required Tools

• Supplemental Trunk Line Workstation (STLWS) or Recent

Change and Verify (RC/V) terminal

• Access to RC/V Menu Interface

Required Material

• The 5ESS

switch must be running a 5E16.2 FR3 software

release or later with the SIP for Packet Trunking - NAR feature

software.

Required Information

• GSM number(s)

Required Conditions

• None

Procedure

............................................................................................................................................................

Use the OP:OFR command to print the SIPTSMS/5881 office records.

Identify the GSM numbers that have SM-2000(s) with the ROUTE

field set to Y.

At the MCC or TLWS type and enter the command:

Deprovisioning

6-8

Lucent Technologies 235-200-118

Issue 3.02B, March 2007