Delete All SCTP Associations (RC/V 33.22)
....................................................................................................................................................................................................................................
Purpose
SCTP Association (RC/V 33.22) defines an association between near
and far SCTP endpoints.
When to use
Use this procedure to delete all SCTP associations.
Related information
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• All SCTP Association numbers
Required Conditions
• All Association sets have been deleted on RC/V 33.23
Procedure
............................................................................................................................................................
1
Dump the SCTPASSC/5889 office records. At the MCC or TLWS
type and enter the command:
OP:OFR:FORM=5889;
Result:
OP OFR FORM=5889 PF is printed followed by a printout
the SCTPASSC/5889 office records.
Deprovisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
6-35
To Next Page
Loading...
Need help?
General
