Delete IP Processor Assignment to PH (RC/V 33.1)
....................................................................................................................................................................................................................................
Purpose
The Internet Protocol (IP) Processor Assignment view (RC/V 33.1) is
used to delete IP processor assignments and parameters on a processor
(PHE2).
When to use
Use this procedure to delete IP parameters on a processor.
Repeat individual steps of this procedure as required.
Related information
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Admonishments
None.
Before you begin
Required Tools
• Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
• Access to RC/V Menu Interface
Required Material
• The 5ESS
®
switch must be running a 5E16.2 FR3 software
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
• Processor ID
• Processor type
• Shelf number
• Channel Group number
Required Conditions
• PROCESSOR GROUP (PCRGRP/5883/33.16 form) has been
deleted
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
Deprovisioning
....................................................................................................................................................................................................................................
6-66
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
To Next Page
Loading...
Need help?
General
