Lucent Technologies 5ESS - Page 205

Required Conditions
• Hardware Growth Procedures are complete.
• Protocol Handler slot is defined (RC/V 22.4)
• Channel Group is assigned a hardware type of PHE2 (RC/V
22.16)
• Channel Group is assigned as IP processor
• PM Group is defined (RC/V 20.32)
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
33.16
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
............................................................................................................................................................
3
Type and enter the insert command.
I
Result:
PROCESSOR GROUP page is displayed and the cursor is
located at PCR GRP field
............................................................................................................................................................
4
Using the RC/V 33.16 form as a guide, type and enter the indicated
values for each field.
• *PCR GRP
• *SM - SIP GSM number
• APPL TYPE - SIPT
• PSU - 0
• PM GROUP - PM group name
Insert Processor Group (RC/V 33.16)
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-39