Result:
Inserting...form inserted
............................................................................................................................................................
7
Type and enter the previous screen command.
<
Result:
The INTERNET PROTOCOL VIEWS page is displayed.
............................................................................................................................................................
8
If desired, type and enter the quit command to exit the RC/V system.
Q
Result:
The RC/V session is terminated.
............................................................................................................................................................
9
Proceed to MCC or STLWS to restore Association Set.
Restore the SCTP Association.
RST:SCTP,ASSOC=a;
Where:
a = Association number
Request the status of the Association:
OP:STATUS,SCTP,ASSOC,ALL;
Examine the output.
For additional information, refer to the SIP Maintenance
Considerations procedure, Resolve SCTP Association Problems,
235-200-118.
............................................................................................................................................................
10
Stop. You have completed this procedure.
Insert SCTP Association Set (RC/V 33.23)
Provisioning
....................................................................................................................................................................................................................................
5-70
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
E ND OF S TEPS
.........................................................................................................................................................................................................................................................
To Next Page
Loading...
