Lucent Technologies 5ESS - Page 249

Required Conditions
• SIP GSM is defined (RC/V 5.80)
• Association set is defined (RC/V 33.23) or UDP path is defined
(RC/V 33.24)
Procedure
............................................................................................................................................................
1
Select and prepare terminal for RC/V activities.
Reference:
“Select and Prepare Terminal” (5-11)
............................................................................................................................................................
2
Type and enter the RC/V form number.
5.71
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
............................................................................................................................................................
3
Type and enter the insert command.
I
Result:
The PACKET GROUP DEFINITION page is displayed and the
cursor is located at the PKT GRP field.
............................................................................................................................................................
4
Using the RC/V 5.71 form as a guide, type and enter the parameters.
• *PKT GRP - packet group number
• #BEARER NET ID - bearer network identifier
• #FAR CLLI - Far end Common Language Location Identifier
• #NEAR CLLI - Near end Common Language Location Identifier
• #HUNT TYPE - 2WF
• #CONTROL TYPE - CANCEL
• One of the following:
- ASSOC SET NAME - Association set name, or
- UDP PATH - UDP path number.
• SIP-T GSM - GSM Number
• SIP-T PARM SET NAME - SIP parameter set name
Insert Packet Group (RC/V 5.71)
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-83