............................................................................................................................................................
7
Using the RC/V 5.1 form as a guide, type and enter the parameters
under the PACKET NETWORK TRUNKING column.
• PKT GRP
• SIPT GRP - Y
• DIFF SERV
............................................................................................................................................................
8
Type and enter the insert command.
I
Result:
Inserting...form inserted
............................................................................................................................................................
9
Type and enter the previous screen command.
<
Result:
TRUNKS VIEWS page is displayed.
............................................................................................................................................................
10
If desired, type and enter the quit command to exit the RC/V system.
Q
Result:
The RC/V session is terminated.
............................................................................................................................................................
11
Stop. You have completed this procedure.
Assign Trunk Group (RC/V 5.1)
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-87
E ND OF S TEPS
.........................................................................................................................................................................................................................................................
To Next Page
Loading...
