Lucent Technologies 5ESS - Page 255

Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
............................................................................................................................................................
2
Type and enter the insert command.
U
Result:
The SIP-T CALL PROCESSING SMS page is displayed and the
cursor is located at the GSM field.
............................................................................................................................................................
3
Using the RC/V 5.81 form as a guide, type and enter the parameters.
• * GSM
• SM2K MODULE - number
• ROUTE - Y
............................................................................................................................................................
4
Enter the insert command.
U
Result:
Updating...form updated
NOTE: If GSM# equals SM2K#, a Warning message is
displayed.
“SM2K Module in SIP-T SMS list should not equal GSM. This
is not applicable for DRM/VCDX office.”
If GSM should/does equal non-GSM enter “I” to ignore the
warning and continue.
............................................................................................................................................................
5
Type and enter the previous screen command.
<
Result:
The TRUNKS VIEWS page is displayed.
............................................................................................................................................................
6
If desired, type and enter the quit command to exit the RC/V system.
Q
Result:
The RC/V session is terminated.
Enable INVITE Requests (RC/V 5.81)
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-89