Lucent Technologies 5ESS User Manual

group assigned to the SIP Packet Group. If no trunk group is assigned,
proceed to step 5.
............................................................................................................................................................
3
If a Trunk Group is assigned to the SIP Packet Group, examine the
RTIDX/5303 office records to determine whether any route indices
point to the trunk group. Record the information from all such forms,
for later use. Update or delete the ROUTE INDEX (ROUTING)
RC/V 10.2 for any such route indices until there are no more route
indices pointing to the trunk group.
............................................................................................................................................................
4
Record the information for the trunk group for later re-insertion, and
delete the Trunk Group on RC/V 5.1.
............................................................................................................................................................
5
Record the information for the SIP packet group for later re-insertion,
and delete the SIP Packet Group on RC/V 5.71.
............................................................................................................................................................
6
If the new far IP address is not in the same IP subnet as the IP
address of the Ethernet-IP interface of the PHs in the processor group
for the UDP path, use
OP:TCPIP,RTDMP and/or examine the
IPROUT/5989 office records to verify that the necessary IP route is
provisioned, or execute the “Insert IP Routing (RC/V 33.3)”
procedure.
............................................................................................................................................................
7
Use EXC:PING to verify the reachability of the new far IP address
from the near IP interface.
............................................................................................................................................................
8
Update the FAR IP ADDR and/or FAR PORT on the RC/V 33.24
UDP PATH view.
............................................................................................................................................................
9
If updates/deletes were made on RC/V 10.2 ROUTE INDEX, RC/V
5.1 TRUNK GROUP, and/or RC/V 5.71 PACKET GROUP
DEFINITION, use the recorded information to update and/or re-insert
those views as required. Refer to the “Add New SIP Packet Trunking
to Another Office” procedure.
Change Far IP Transport Address for UDP
Path
Provisioning
....................................................................................................................................................................................................................................
5-130
Lucent Technologies 235-200-118
Issue 3.02B, March 2007

Lucent Technologies 5ESS Specifications

General

Brand	Lucent Technologies
Model	5ESS
Category	Switch
Language	English