Result:
Warnings may be displayed depending on the changes
made.
............................................................................................................................................................
16
Enter the ignore command.
I
Result:
Ignoring...form Updated.
............................................................................................................................................................
17
Type and enter the previous page command.
<
Result:
INTERNET PROTOCOL VIEWS page is displayed.
............................................................................................................................................................
18
Are Ethernet Interface IP parameter changes required?
• If yes, continue with the next step.
• If no, proceed to step 26 to skip the Ethernet interface IP
parameter changes.
............................................................................................................................................................
19
Type and enter the RC/V form number.
33.4
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
............................................................................................................................................................
20
Type and enter the update command.
U
Result:
Screen 1 of the ETHERNET INTERNET PROTOCOL (IP)
INTERFACE ASSIGNMENT page is displayed and the cursor is
located at the SM field.
Change IP Parameters for a SIP processor
group
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-139
To Next Page
Loading...
Need help?
General
