Lucent Technologies 5ESS - Page 309

............................................................................................................................................................
3
Type and enter the update command.
U
Result:
The SCTP ENDPOINT PARAMETERS page is displayed and
the cursor is located at the PARM SET NAME field.
............................................................................................................................................................
4
Using the RC/V 33.18 form as a guide, type and enter.
• *PARM SET NAME
............................................................................................................................................................
5
Modify the parameters as needed.
............................................................................................................................................................
6
Enter the update command.
U
Result:
Updating...form updated
............................................................................................................................................................
7
Type and enter the previous screen command.
<
Result:
The INTERNET PROTOCOL VIEWS page is displayed.
............................................................................................................................................................
8
If desired, type and enter the quit command to exit the RC/V system.
Q
Result:
The RC/V session is terminated.
............................................................................................................................................................
9
At the MCC or TLWS type and enter the backup command.
BKUP:ODD;
Result:
BKUP ODD COMPLETED
............................................................................................................................................................
10
Stop. You have completed this procedure.
Change SCTP Endpoint Parameters
Provisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
5-143
E ND OF S TEPS
.........................................................................................................................................................................................................................................................