R
Result:
The view is refreshed with the channel group
information.
............................................................................................................................................................
22
Determine the SM, PSU shelf, and channel group(s) assigned to the
processor group.
............................................................................................................................................................
23
Type and enter the previous screen command.
<
Result:
INTERNET PROTOCOL VIEWS page is displayed.
............................................................................................................................................................
24
Type and enter the RC/V form number.
33.4
Result:
Enter Database Operation I=Insert,R=Review,U=Update,
D=Delete:
............................................................................................................................................................
25
Type and enter the review command.
R
Result:
Screen 1 of the ETHERNET INTERNET PROTOCOL (IP)
INTERFACE ASSIGNMENT page is displayed and the cursor is
located at the SM field.
............................................................................................................................................................
26
Using screen 1 of the RC/V 33.4 form as a guide and the data
recorded in Step 22, type and enter the parameters.
• *SM - Switching Module number
• *PSU - Packet Switching Unit number
• *SHELF - PSU shelf number
• *CHANNEL GROUP - Channel group position
............................................................................................................................................................
27
Proceed to screen 2.
2
Delete Existing SCTP Association to SCTP
Far Endpoint
Deprovisioning
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
6-105