Lucent Technologies 5ESS - Page 445

OP:STATUS,SCTP,NEAREPT=a;
Where:
a = near endpoint name
Result:
Generates a status report of a specific SCTP near endpoint.
............................................................................................................................................................
2
Check the result and take appropriate action:
• If the result is
NG - INVALID NEAR ENDPOINT NAME, then output
the associated office record:
OP:OFR:FORM=5886;
Refer to Translation Guide (TG-5), 235-080-100, for obtaining
office record numbers.
• If the result includes
NOSERV or OOS, refer to the SIP for Packet
Trunking Corrective Maintenance procedure, Resolve SCTP Near
Endpoint Problems, 235-200-118, to resolve the problem.
• For all others, refer to the Output Messages Manual,
235-600-750, for additional information.
............................................................................................................................................................
3
Stop. You have completed this procedure.
Procedure to Obtain
Detailed Status of Near
Endpoint
............................................................................................................................................................
1
Request a detailed status report for a specific near endpoint:
OP:STATUS,SCTP,NEAREPT=a,DETAIL;
Where:
a = near endpoint name
Result:
Generates a status report of a specific near endpoint and for all
associations assigned to that near endpoint.
Request SCTP Near Endpoint Status
Maintenance Considerations
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
Lucent Technologies
7-9
E ND OF S TEPS
............................................................................................................................................................