e = Processor group number
f = Packet switch unit 2 shelf number
g = PHE2 number
h = Channel group number
i = Status of an endpoint or association before the autonomous
transition
j = Status of endpoint or association after the autonomous transition
............................................................................................................................................................
2
Check the result and take appropriate action:
• If the REPT SCTP ENDPOINT change report is generated with
preceding asterisks, then this is a major alarm indicating a near
endpoint transitioned to
NOSERV. Refer to the SIP for Packet
Trunking Corrective Maintenance procedure, Resolve SCTP Near
Endpoint Problems, 235-200-118.
• If the REPT SCTP ENDPOINT change report is generated
without preceding asterisks, then make note of the change and
determine whether further actions are required.
............................................................................................................................................................
3
Stop. You have completed this procedure.
Analyze SCTP Near Endpoint Change
Report
Maintenance Considerations
....................................................................................................................................................................................................................................
7-80
Lucent Technologies 235-200-118
Issue 3.02B, March 2007
E ND OF S TEPS
.........................................................................................................................................................................................................................................................
To Next Page
Loading...
