Lust MASTERCONTROL MC6000 Series User Manual

52 • Subject area _MOT – Motor parameters Parameter Description MC6000/7000
_ENCD
_VAL
Index
_VFCON
_PMOD
_KPAD
Contents
Introduction
_SIO
_SCTY
_REF
_SYS
_IO1
_IO2
_CAN
_OPT1
_MOT
_CONF
_TCON
_SCON
_PCON
322-MOMC1 - Value 1 of continuous magnetizing characteristic
Source:
Function: Motor constant for the field weakening range
The field weakening can be shut off by setting MOMC0 = 0.
323-MOMC2 - Value 2 of continuous magnetizing characteristic
Source:
Function: Motor constant for the field weakening range
The field weakening can be shut off by setting MOMC0 = 0.
324-MOMC3 - Value 3 of continuous magnetizing characteristic
Source:
Function: Motor constant for the field weakening range
The field weakening can be shut off by setting MOMC0 = 0.
CAUTION - Do not change parameter!
Parameter only for development and service purposes.
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
-128 128 0.2868 – R5W5 DRIVE FLOAT32
CAUTION - Do not change parameter!
Parameter only for development and service purposes.
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
-128 128 -1.9 – R5W5 DRIVE FLOAT32
CAUTION - Do not change parameter!
Parameter only for development and service purposes.
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
-128 128 3.966 – R5W5 DRIVE FLOAT32

Lust MASTERCONTROL MC6000 Series Specifications

General

Brand	Lust
Model	MASTERCONTROL MC6000 Series
Category	Controller
Language	English