Lust MASTERCONTROL MC6000 Series User Manual

82 • Subject area _KPAD – KeyPad KP100 Parameter Description MC6000/7000
_ENCD
_VAL
Index
_VFCON
_PMOD
_KPAD
Contents
Introduction
_SIO
_SCTY
_REF
_SYS
_IO1
_IO2
_CAN
_OPT1
_MOT
_CONF
_TCON
_SCON
_PCON
100-PSW2 - Password for user level 2 of KP100
Source:
Function: Password Mode 2
Password for user level 2 can be activated with these parameters.
(scan --PWx-- on change of user level MODE)
101-PSW3 - Password for user level 3 of KP100
Source:
Function: Password Mode 3
Password for user level 3 can be activated with these parameters.
(scan --PWx-- on change of user level MODE)
102-PSW4 - Password for user level 4 of KP100
Source:
Function: Password Mode 4
Password for user level 4 can be activated with these parameters.
(scan --PWx-- on change of user level MODE)
103-PSW5 - Password for user level 5 of KP100
Source:
Function: Password Mode 5
Password for user levels 5
(scan --PWx-- on change of user level MODE)
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
0 65535 0 – R2W2 SYSTM USIGN16
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
0 65535 0 – R3W3 SYSTM USIGN16
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
0 65535 546 R4W4 SYSTM USIGN16
CAUTION - Do not change parameter!
Parameter only for development and service purposes
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
0 65535 657 – R5W5 APP USIGN16

Lust MASTERCONTROL MC6000 Series Specifications

General

Brand	Lust
Model	MASTERCONTROL MC6000 Series
Category	Controller
Language	English