_MOT – Motor parameters Subject area • 55Parameter Description MC6000/7000
_ENCD
_VAL
Index
_VFCON
_PMOD
_KPAD
Contents
Introduction
_SIO
_SCTY
_REF
_SYS
_IO1
_IO2
_CAN
_OPT1
_MOT
_CONF
_TCON
_SCON
_PCON
315-MOSNM - Nominal speed
Source: Motor Speed Nominal
Function: Nominal speed of the motor
328-MOTYP - Motor type
Source: Motor type
Function: Parameter only for MC7000.
The parameter is a string and contains the symbolic name of the motor to which the servo-
controller is set (max. 20 characters).
Example: By way of the D
RIVEMANAGER the motor data set PSF11R83.00D is transferred onto the
device. Parameter MOTYP then contains the string “PSF11R83”.
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
50 6000 3000 rpm R1W5 DRIVE USIGN16
Values:
Minimum Maximum Factory set. Unit MODE SMARTCARD Type
– – – – R1W5 DRIVE TERM
Note:
When installing a motor via the D
RIVEMANAGER, the file name of the relevant motor
data is stored in this string.
Attention!
There is no control on whether the servo really does contain precisely the parameters
originally entered in the file with the name corresponding to this parameter.
To Next Page
Loading...
Need help?
General