MacDon FlexDraper FD75 - Page 148

214323 130 Revision B
Refer to the following instructions for your specific combine model:
• 4.5 Case IH 2300/2500 and 5088/6088/7088 Combines, page 139
• 4.6 Case IH 5130/6130/7130 and 5140/6140/7140 Midrange Combines, page 143
• 4.7 Case IH 7010/8010, 7120/8120/9120, 7230/8230/9230, and 7240/8240/9240 Combines, page 151
• 4.8 Challenger
®
Combines, page 163
• 4.9 CLAAS 500 Series Combines, page 171
• 4.10 CLAAS 600 and 700 Series Combines, page 181
• 4.11 Gleaner
®
R62/R72 Combines, page 188
• 4.12 Gleaner
®
R65/R66/R75/R76 and S Series Combines – Except S9 Series, page 192
• 4.13 Gleaner
®
S9 Series Combines, page 202
• 4.14 John Deere 50 Series Combines, page 218
• 4.15 John Deere 60 Series Combines, page 226
• 4.16 John Deere 70 Series Combines, page 233
• 4.17 John Deere S and T Series Combines, page 240
• 4.18 John Deere S7 Series Combines, page 253
• 4.19 New Holland Combines CR/CX Series – CR Series, Model Year 2014 and Earlier, page 265
• 4.20 New Holland Combines – CR Series, Model Year 2015 and Later, page 274
AUTO HEADER HEIGHT CONTROL