MacDon FlexDraper FD75 - Stub Guard Conversion Kit; Vertical Knife Mounts

214323 512 Revision B
7.3.3 Stub Guard Conversion Kit
Stub guards, complete with top guides and adjuster shoes, are designed to cut tough crops.
1001244
Figure 7.9: Stub Guards
Installation and adjustment instructions are included in the kit.
Order one of the following bundles according to your
header size:
• 9.1 m (30 ft.) – MD #B5012
• 10.7 m (35 ft.) – MD #B5013
7.3.4 Vertical Knife Mounts
The vertical knife mounts allow the installation of vertically oriented knives onto both ends of the header.
ϭϬϯϵϴϯϮ
Figure 7.10: Vertical Knife Mount
The vertical knives themselves are not sold by MacDon and
must be purchased from a separate supplier.
Installation and adjustment instructions are included in the
bundle.
Order the following bundles according to left or right side:
• Left side: MD #B9048
• Right side: MD #B9051
NOTE:
The Left Vertical Knife Mount kit can only be installed if installing
both sides.
OPTIONS AND ATTACHMENTS