MacDon FlexDraper FD75 - Header Setup; Header Attachments; Header Settings

214323 43 Revision B
3.6 Header Setup
The setup section provides information about adjustments, optional attachments, and optimizing the header for various
conditions.
3.6.1 Header Attachments
Several attachments to optimize the performance of your FD75 FlexDraper
®
Header are available as options from your
MacDon Dealer.
Refer to 7 Options and Attachments, page 507 for descriptions of available kits.
3.6.2 Header Settings
Table 3.2, page 44 provides a guideline for setting up the FD75 FlexDraper
®
Header; however, the suggested settings can be
changed to suit various crops and conditions not covered in the table.
For additional information about optimizing header performance, refer also to 3.6.4 Reel Settings, page 50.
OPERATION