MacDon FlexDraper FD75 - Detaching Header from Case IH Combine

214323 294 Revision B
1002467
A
B
Figure 5.12: Float Lock in UNLOCK Position
20. Disengage each adapter float lock by moving latch (A) away
from the adapter and moving both header float lock levers
(B) down (UNLOCK position).
5.2.2 Detaching Header from Case IH Combine
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the header for any reason.
HEADER ATTACHMENT/DETACHMENT