214323 204 Revision B
Figure 4.145: Header Configuration Menu on Header
Settings Page
3. Touch HEADER CONFIGURATION field (A). A page showing
the predefined header profiles appears.
• If the MacDon header is already set up, it will appear on
the list of headers. Touch MacDon header title (B) to
highlight the selection in blue. Touch green check
mark (E).
• If only default header (D) is shown, touch ADD/
KEYBOARD button (C). Use the on-screen keyboard to
enter the relevant MacDon header information. Ttouch
one of the areas at the bottom of the page to return to
the HEADER SETTINGS page.
– Touching the green check mark causes the current
settings to be saved.
– Touching the garbage can icon removes the
highlighted header profile from the list.
– Touching the red X cancels any changes.
AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
