MacDon FlexDraper FD75 - Page 264

214323 246 Revision B
1003776
A
Figure 4.232: John Deere Combine Display
5. Select THRESHING CLEARANCE (A). A list of calibration
options appears.
1003777
A
B
Figure 4.233: John Deere Combine Display
6. Select FEEDER HOUSE SPEED (A) and calibrate this setting.
7. Select HEADER (B) and calibrate this setting.
1003778
A
Figure 4.234: John Deere Combine Display
8. Press icon (A) with either FEEDER HOUSE SPEED or HEADER
selected. The icon will turn green.
NOTE:
The feeder house speed calibration procedure must be
done before the header calibration procedure.
AUTO HEADER HEIGHT CONTROL