6. CALIBRATION
No. 99MBB122A
6-3
2 Mount the SJ-210 on the calibration stage.
Setting of the SJ-210 on to the calibration stage
3 Set the SJ-210 so that the detector traversing direction is perpendicular to the cutter
mark of the precision roughness specimen.
Setting positions of the SJ-210 (standard type and detector retracting type)
and precision roughness specimen
SJ-210
SJ-210
Detector
Detector
Detector
traversing
direction
Cutter mark
90 degree
To Next Page
Loading...
